Stòr laser raycus fiber
Stòr Max Fiber Laser
Stòr IPG Fiber Laser air a thoirt a-steach
|
| Raycus | IPG |
|
| Structar agus Feartan | mìneachadh | ||
| Sreath gnìomhachais | Amalachadh an t-sreath gnìomhachais gu lèir, prìomh phàirtean fèin-leasaichte agus fèin-riochdaichte | Amalachadh an t-sreath gnìomhachais gu lèir, prìomh phàirtean fèin-leasaichte agus fèin-riochdaichte | Chan eil ach 2 chompanaidh san t-saoghal air fhilleadh a-steach don t-sreath gnìomhachais gu lèir |
| Structar stòr pumpa | Structar snaim bunaiteach singilte | Structar snaim bunaiteach singilte | Tha na sgoltagan neo-eisimeileach, chan eil iad a 'toirt buaidh air a chèile, seasmhach agus earbsach |
| Cumhachd modal agus meud | Modalan 1KW * 6 (tha an comas teignigeach modal singilte as motha aig Raycus a’ ruighinn barrachd air 3KW) | 3 2KW modalan (a 'sàbhaladh cosgais saothrachaidh agus a' lùghdachadh meud) | Mar as ìsle cumhachd a ’mhodal, is ann as seasmhaiche a tha e, tha na cunnartan às deidh reic gu ìre mhath sgapte, agus tha cosgais ath-chuir modal nas ìsle |
| Configuration Fiber | 20 m de dh'fhaid 100 micron trast-thomhas tar-chuir freumhag | 20 m de dh'fhaid 100 micron trast-thomhas tar-chuir freumhag | cleachd an aon rud |
| Uinneag dìon criostail Quartz QBH | Inbhe | nach eil air a ghabhail a-steach | Anns a 'phròiseas co-chruinneachaidh agus cumail suas às dèidh reic, mura h-eil uinneag dìon ann, bidh e a' truailleadh ceann snàithleach optigeach tar-chuir agus ag adhbhrachadh tubaist losgaidh.Ach, chan eil barantas agus barantas sam bith aig an snàithleach optigeach tar-chuir branda a chaidh a thoirt a-steach, agus tha a’ phrìs ùr nan deichean mhìltean.Tha Raycus a’ tighinn gu ìre le uinneagan dìon agus a’ toirt seachad seirbheisean ùra an-asgaidh airson a’ chiad uair a’ truailleadh agus a’ losgadh uinneagan dìon. |
| càileachd beam | BPP<4 | BPP<4 |
|
| Clàr lasachaidh cumhachd laser | nas lugha na 3% gach bliadhna | nas lugha na 3% gach bliadhna | Bidh Raycus a’ gleidheadh cumhachd gun fheum anns an leusair gus dèanamh cinnteach gun gabh an leusair a thoirt air ais gu staid an fhactaraidh ma tha lasachadh sam bith taobh a-staigh 2 bhliadhna |
| Sònrachaidhean Seasmhachd Cumhachd agus Lùghdachadh | |||
| Seasmhachd cumhachd | <±3% | <±3% | co-ionann |
| Clàr lasachaidh cumhachd laser | <3% gach bliadhna | <3% gach bliadhna | co-ionann |
| Iarrtasan | |||
| Comas gearraidh | Carbon stàilinn 25mm | Carbon stàilinn 25mm | co-ionann |
| Barantas agus Seirbheis Às-reic | |||
| Barantas | Ùine barantais + paramadairean barantais dà-bhliadhna | Ùine barantais | Tha a bhith a’ gealltainn comas cleachdaidh a’ toirt iomradh air dèanamh cinnteach nach eil an inneal briste, agus tha gealltainn na crìochan cleachdaidh a’ toirt iomradh air dèanamh cinnteach gu bheil na paramadairean toraidh solais laser co-chòrdail ris an fheadhainn bhon fhactaraidh fo chumha nach tèid an inneal a mhilleadh. |
Paramadair gearraidh Rel-C1000
| REL-C1000 Lean air adhart le Stòr Laser (25μm) | ||||||||
| Stuth | Tigheadas （mm） | Luas （m/mion） | Cumhachd （w） | Gas | cuideam adhair (bàr) | Sròine (mm) | suidheachadh fòcas (mm) | àirde gearraidh (mm) |
| Stàilinn gualain | 0.8 | 0.8 | 1000 | N2/Air | 10 | 1.5S | 0 | 1 |
| 1 | 10 | 10 | 1.5S | 0 | 1 | |||
| 2 | 4 | 1000 | O2 | 2 | 1.2d | +3 | 0.8 | |
| 3 | 3 | 0.6 | 1.2d | +3 | 0.8 | |||
| 4 | 2.3 | 0.6 | 1.2d | +3 | 0.8 | |||
| 5 | 1.8 | 0.6 | 1.2d | +3 | 0.8 | |||
| 6 | 1.5 | 0.6 | 1.5d | +3 | 0.8 | |||
| 8 | 0.8 | 0.6 | 1.5d | +3 | 0.8 | |||
| 10 | 0.8 | 0.6 | 2.5d | +3 | 0.8 | |||
| Stàilinn nach meirg | 1 | 20 | 1000 | N2 | 12 | 1.5S | 0 | 0.5 |
| 2 | 13 | 12 | 1.5S | 0 | 0.5 | |||
| 3 | 6 | 12 | 2.0S | -1 | 0.5 | |||
| 5 | 3 | 12 | 3.0S | -1.5 | 0.5 | |||
| 6 | 1 | 14 | 3.0S | -2 | 0.5 | |||
| Alloy Aluminium | 0.8 | 18 | 1000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 1 | 10 | 12 | 1.5S | 0 | 0.5 | |||
| 2 | 5 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 1.5 | 16 | 3.0S | -1.5 | 0.5 | |||
| Bras | 1 | 9 | 1000 | N2 | 12 | 2.0S | 0 | 0.5 |
| 2 | 2 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 0.8 | 16 | 3.0S | -1.5 | 0.5 | |||
PS: Thacomharraichte deargtha na paramadairean sa chlàr nam paramadairean dearbhaidh, air a bheil diofar fhactaran a’ toirt buaidh mhòr air an fhìor ghiollachd, agus nach eil iomchaidh ach airson cinneasachadh baidse beaga.Chan eilear a’ moladh mòr-chinneasachadh agus giollachd, agus thathas a’ moladh lasers cumhachd nas àirde.
Paramadair gearraidh Rel-C1500
| REL-C1500 Lean air adhart le Stòr Laser (50μm) | ||||||||
| Stuth | Tigheadas （mm） | Luas （m/mion） | Cumhachd （w） | Gas | cuideam adhair (bàr) | Sròine (mm) | suidheachadh fòcas (mm) | àirde gearraidh (mm) |
| Stàilinn Charbon | 1 | 20 | 1500 | N2 / adhair | 10 | 1.5S | 0 | 1 |
| 2 | 5 | 1500 | O2 | 2 | 1.2d | +3 | 0.8 | |
| 3 | 3.6 | 0.6 | 1.2d | +3 | 0.8 | |||
| 4 | 2.5 | 0.6 | 1.2d | +3 | 0.8 | |||
| 5 | 1.8 | 0.6 | 1.2d | +3 | 0.8 | |||
| 6 | 1.4 | 0.6 | 1.5d | +3 | 0.8 | |||
| 8 | 1.2 | 0.6 | 1.5d | +3 | 0.8 | |||
| 10 | 1 | 0.6 | 2.0d | +2.5 | 0.8 | |||
| 12 | 0.8 | 0.6 | 2.0d | +2.5 | 0.8 | |||
| 14 | 0.65 | 0.6 | 3.0d | +2.5 | 0.8 | |||
| 16 | 0.5 | 0.6 | 3.0d | +2.5 | 0.8 | |||
| Stàilinn nach meirg | 1 | 20 | 1500 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 7 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 4.5 | 12 | 2.5S | -1.5 | 0.5 | |||
| 5 | 1.5 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 0.8 | 16 | 3.0S | -3 | 0.5 | |||
| Alloy Aluminium | 1 | 18 | 1500 | N2 | 12 | 1.5S | 0 | 0.5 |
| 2 | 6 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 2.5 | 14 | 2.5S | -1.5 | 0.5 | |||
| 4 | 0.8 | 16 | 3.0S | -2 | 0.5 | |||
| Bras | 1 | 15 | 1500 | N2 | 12 | 1.5S | 0 | 0.5 |
| 2 | 5 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 1.8 | 14 | 2.5S | -1.5 | 0.5 | |||
PS: Tha na paramadairean comharraichte dearg sa chlàr nam paramadairean dearbhaidh, air a bheil diofar fhactaran a’ toirt buaidh mhòr air an fhìor ghiollachd, agus chan eil iad freagarrach ach airson cinneasachadh baidse beaga.Chan eilear a’ moladh mòr-chinneasachadh agus giollachd, agus thathas a’ moladh lasers cumhachd nas àirde.
Paramadair gearraidh Rel-C2000
| REL-C2000 Lean air adhart le Stòr Laser (50 μm) | ||||||||
| Stuth | Tigheadas （mm） | Luas （m/mion） | Cumhachd （w） | Gas | cuideam adhair (bàr) | Sròine (mm) | suidheachadh fòcas (mm) | àirde gearraidh (mm) |
| Stàilinn Charbon | 1 | 25 | 2000
| N2 / adhair | 10 | 1.5S | 0 | 1 |
| 2 | 9 | 10 | 2.0S | -1 | 05 | |||
| 2 | 5.2 | 2000 | O2 | 1.6 | 1.0d | +3 | 0.8 | |
| 3 | 4.2 | 0.6 | 1.0d | +3 | 0.8 | |||
| 4 | 3 | 0.6 | 1.0d | +3 | 0.8 | |||
| 5 | 2.2 | 0.6 | 1.2d | +3 | 0.8 | |||
| 6 | 1.8 | 0.6 | 1.2d | +3 | 0.8 | |||
| 8 | 1.3 | 0.5 | 2.0d | +2.5 | 0.8 | |||
| 10 | 1.1 | 0.5 | 2.0d | +2.5 | 0.8 | |||
| 12 | 0.9 | 0.5 | 2.5d | +2.5 | 0.8 | |||
| 14 | 0.8 | 0.5 | 3.0d | +2.5 | 0.8 | |||
| 16 | 0.7 | 0.6 | 3.5d | +2.5 | 0.8 | |||
| 18 | 0.5 | 0.6 | 4.0d | +3 | 0.8 | |||
| 20 | 0.4 | 0.6 | 4.0d | +3 | 0.8 | |||
| Stàilinn nach meirg | 1 | 28 | 2000 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 10 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 5 | 12 | 2.0S | -1.5 | 0.5 | |||
| 4 | 3 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 2 | 14 | 3.0S | -.5 | 0.5 | |||
| 6 | 1.5 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 0.6 | 16 | 3.0S | -4 | 0.5 | |||
| Alloy Aluminium | 1 | 20 | 2000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 10 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 4 | 14 | 2.0S | -1.5 | 0.5 | |||
| 4 | 1.5 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 0.9 | 16 | 3.0 | -2.5 | 0.5 | |||
| 6 | 0.6 | 16 | 3.0 | -3 | 0.5 | |||
| Bras | 1 | 18 | 2000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 8 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 3 | 14 | 2.5S | -1.5 | 0.5 | |||
| 4 | 1.3 | 16 | 3.0S | -2 | 0.5 | |||
| 5 | 0.8 | 16 | 3.0S | -2.5 | 0.5 | |||
PS: Tha na paramadairean comharraichte dearg sa chlàr nam paramadairean dearbhaidh, air a bheil diofar fhactaran a’ toirt buaidh mhòr air an fhìor ghiollachd, agus chan eil iad freagarrach ach airson cinneasachadh baidse beaga.Chan eilear a’ moladh mòr-chinneasachadh agus giollachd, agus thathas a’ moladh lasers cumhachd nas àirde.
Paramadair gearraidh Rel-C3000
| REL-C3000 Lean air adhart le Stòr Laser (50μm) | ||||||||
| Stuth | Tigheadas （mm） | Luas （m/mion） | Cumhachd （w） | Gas | cuideam adhair (bàr) | Sròine (mm) | suidheachadh fòcas (mm) | àirde gearraidh (mm) |
| Stàilinn Charbon | 1 | 35 | 3000
| N2 / adhair | 10 | 1.5S | 0 | 1 |
| 2 | 20 | 10 | 2.0S | 0 | 0.5 | |||
| 2 | 5.5 | 3000 | O2 | 1.6 | 1.0d | +3 | 0.8 | |
| 3 | 4 | 0.6 | 1.0d | +4 | 0.8 | |||
| 4 | 3.5 | 0.6 | 1.0d | +4 | 0.8 | |||
| 5 | 3.2 | 0.6 | 1.2d | +4 | 0.8 | |||
| 6 | 2.7 | 0.6 | 1.2d | +4 | 0.8 | |||
| 8 | 2.2 | 0.5 | 1.2d | +4 | 0.8 | |||
| 10 | 1.5 | 0.5 | 1.2d | +4 | 0.8 | |||
| 12 | 1 | 0.5 | 3.0d | +4 | 0.8 | |||
| 14 | 0.9 | 0.5 | 3.0d | +4 | 0.8 | |||
| 16 | 0.75 | 0.6 | 3.5d | +4 | 0.8 | |||
| 18 | 0.65 | 0.6 | 4.0d | +4 | 0.8 | |||
| 20 | 0.6 | 0.6 | 4.0d | +4 | 0.8 | |||
| 22 | 0.55 | 0.6 | 4.0d | +4 | 0.8 | |||
| Stàilinn nach meirg | 1 | 45 | 3000 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 24 | 12 | 2.0S | -0.5 | 0.5 | |||
| 3 | 10 | 12 | 2.5S | -1.5 | 0.5 | |||
| 4 | 6.5 | 14 | 2.5S | -2.5 | 0.5 | |||
| 5 | 3.6 | 14 | 3.0S | -3 | 0.5 | |||
| 6 | 2.7 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 1.2 | 16 | 3.5S | -3.5 | 0.5 | |||
| 10 | 0.8 | 16 | 4.0S | -4 | 0.5 | |||
| Alloy Aluminium | 1 | 30 | 3000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 18 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 8 | 14 | 2.0S | -1 | 0.5 | |||
| 4 | 6 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 3.2 | 16 | 3.0S | -3 | 0.5 | |||
| 6 | 2 | 16 | 3.0S | -3.5 | 0.5 | |||
| 8 | 0.9 | 16 | 3.5S | -4 | 0.5 | |||
| Bras | 1 | 28 | 3000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 15 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 6 | 14 | 2.5S | -1 | 0.5 | |||
| 4 | 3 | 14 | 3.0S | -2 | 0.5 | |||
| 5 | 2.2 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 1.3 |
|
| 16 | 3.0S | -3 | 0.5 | |
PS: Tha na paramadairean comharraichte dearg sa chlàr nam paramadairean dearbhaidh, air a bheil diofar fhactaran a’ toirt buaidh mhòr air an fhìor ghiollachd, agus chan eil iad freagarrach ach airson cinneasachadh baidse beaga.Chan eilear a’ moladh mòr-chinneasachadh agus giollachd, agus thathas a’ moladh lasers cumhachd nas àirde.
REL-C4000 Laser tùs paramadair
| REL-C4000 Lean air adhart le Stòr Laser (50μm) |
| ||||||||
| Stuth | Tigheadas （mm） | Luas （m/mion） | Cumhachd （w） | Gas | cuideam adhair (bàr) | Sròine (mm) | suidheachadh fòcas (mm) | àirde gearraidh (mm) | Sanas |
| Stàilinn Charbon | 1 | 35 | 4000 | N2 / adhair
| 10 | 1.5S | 0 | 1 | 1 |
| 2 | 15 | 4000 | 10 | 2.0S | -1 | 0.5 | |||
| 3 | 10 | 4000 | 10 | 2.0S | -1.5 | 0.5 | |||
| 3 | 4.5 | 1800 | O2 | 0.6 | 1.2d | +3 | 0.8 | 2 | |
| 4 | 3.5 | 2400 | 0.6 | 1.2d | +3 | 0.8 | |||
| 5 | 3.2 | 2400 | 0.6 | 1.2d | +3 | 0.8 | |||
| 6 | 2.8 | 3000 | 0.6 | 1.2d | +3 | 0.8 | |||
| 8 | 2.3 | 3600 | 0.6 | 1.2d | +3 | 0.8 | |||
| 10 | 2 | 4000 | 0.6 | 1.2d | +3 | 0.8 | |||
| 12 | 1.2 | 1800-2200 | 0.6 | 3.0d | +2.5 | 0.8 | |||
| 14 | 1 | 1800-2200 | 0.5 | 3.5d | +2.5 | 0.8 | |||
| 16 | 0.8 | 2200-2600 | 0.5 | 3.5d | +2.5 | 0.8 | |||
| 18 | 0.7 | 2200-2600 | 0.5 | 4.0d | +2.5 | 0.8 | |||
| 20 | 0.65 | 2200-2600 | 0.5 | 4.0d | +3 | 0.8 | |||
| 22 | 0.6 | 2200-2800 | 0.5 | 4.5d | +3 | 0.8 | |||
| 25 | 0.5 | 2400-3000 | 0.5 | 5.0d | +3 | 0.5 | |||
| Stàilinn nach meirg | 1 | 40 | 4000 | N2 | 10 | 1.5S | 0 | 0.8 |
|
| 2 | 20 | 12 | 2.0S | -1 | 0.5 | ||||
| 3 | 12 | 12 | 2.0S | -1.5 | 0.5 | ||||
| 4 | 7 | 12 | 2.5S | -2 | 0.5 | ||||
| 5 | 4.5 | 14 | 2.5S | -2.5 | 0.5 | ||||
| 6 | 3.5 | 14 | 3.0S | -3 | 0.5 | ||||
| 8 | 1.8 | 14 | 3.0S | -4 | 0.5 | ||||
| 10 | 1.2 | 16 | 4.0S | -5 | 0.5 | ||||
| 12 | 0.8 | 16 | 4.0S | -6 | 0.5 | ||||
| Alloy Aluminium | 1 | 30 | 4000 | N2 | 12 | 1.5S | 0 | 0.6 |
|
| 2 | 20 | 12 | 2.0S | -1 | 0.5 | ||||
| 3 | 13 | 14 | 2.0S | -1.5 | 0.5 | ||||
| 4 | 7 | 14 | 2.5S | -2 | 0.5 | ||||
| 5 | 5 | 14 | 2.5S | -2.5 | 0.5 | ||||
| 6 | 3 | 16 | 3.0S | -3 | 0.5 | ||||
| 8 | 1.3 | 16 | 3.0S | -4 | 0.5 | ||||
| 10 | 0.8 | 16 | 3.5 | -5 | 0.5 | ||||
| Bras | 1 | 28 | 4000 | N2 | 12 | 1.5S | 0 | 0.6 |
|
| 2 | 15 | 12 | 1.5S | -1 | 0.6 | ||||
| 3 | 8 | 14 | 2.0S | -1 | 0.6 | ||||
| 4 | 5 | 14 | 2.5S | -2 | 0.5 | ||||
| 5 | 3 | 14 | 3.0S | -2 | 0.5 | ||||
| 6 | 2.5 | 16 | 3.0S | -2.5 | 0.5 | ||||
| 8 | 1 | 16 | 3.0S | -4 | 0.5 | ||||
Nota 1: Thathas a’ moladh èadhar no nitrogen a chleachdadh gus stàilinn gualain 1-3mm a ghearradh, tha an astar gearraidh nas luaithe na astar ocsaidean, agus bidh beagan slag ann.
Nota 2: Bidh an cumhachd a thèid a chleachdadh airson coimiseanadh agus astar coimiseanaidh cuideachd ag atharrachadh a rèir purrachd gas na làraich, càileachd truinnsear, msaa.
Beachdan: Tha na paramadairean comharraichte dearg sa chlàr nam paramadairean dearbhaidh, air a bheil diofar fhactaran a’ toirt buaidh mhòr air an fhìor ghiollachd, agus nach eil iomchaidh ach airson cinneasachadh baidse beaga.Chan eilear a’ moladh mòr-chinneasachadh agus giollachd, agus thathas a’ moladh lasers cumhachd nas àirde.
